Our Products
You are here: Home / Products
Race Ways Junction Boxes
|
Features
• GI Junction Box suitable for trunking with duct entry of 25mm to 60mm.
• Epoxy coated trap lid to prevent and rust accumulation on the exposed parts
• Smooth curves on all four sides of the pillar to ensure safety of Cat 6 cables, when pulled
• Excellent load bearing capacity of 3.6 tons on the trap lid.
• Adjustable levelling screws on all 4 sides to match any floor finish.
Dimensions
MEM ®-JB100
100mmx100mmx50 - 75mm depth
MEM ®-JB150
150mmx150mmx50 - 75mm depth
MEM ®-JB 250
250mmx250mmx50 - 75mm depth
MEM ®-JB 300
300mmx300mmx50 - 75mm depth
MEM ®-JB 350
350mmx350mmx50 - 75mm depth
MEM ®-JB 400
400mmx400mmx50 - 75mm depth
"MEM ®" Race Ways Junction Boxes |
|||
S.NO. |
SIZE(mm) |
Thickness (mm) |
|
MEM ®-R-01 |
100X50 | 1.6/2/2.5/3 |
|
MEM ®-R-02 |
150X50 |
1.6/2/2.5/3 |
|
MEM ®-R-03 |
250X50 |
1.6/2/2.5/3 |
|
MEM ®-R-04 |
300X50 |
1.6/2/2.5/3 |
|
MEM ®-R-05 |
350X50 |
1.6/2/2.5/3 |
|
MEM ®-R-07 |
400X50 |
1.6/2/2.5/3 |
Race Ways Junction Boxes |
|
Light Duty Race Ways Junction Boxes |
Light duty Race Ways Junction Boxes with special perforation in the base with moderate ventilation with added cable support advantage. |
Medium Duty Race Ways Junction Boxes |
Medium duty Race Ways Junction Boxes with special perforation right angle edge in side rail for reinforcement and edge protection. |
Heavy Duty Race Ways Junction Boxes |
Heavy duty Race Ways Junction Boxes with special perforation in the base and rolled edge in side rail for reinforcement and edge protection including cable tray connector sets. |